Tom, Around 1979 or so, AMC got rid of the Indak fuse blocks and began using Delco style blocks. No more rivets. At least, that was true for the Pacer; I'd have to dig out a TSM to be certain that they did the same on the others. --Glen At 12:09 PM 9/7/2007, you wrote: >These kinds of problems can be sometimes a terror to find, but usually end up >somethin simple. > >First off, I'd suspect that damned AMC fuseblock. It's a piece of crap. Check >that the battery feed wire is TIGHT! The faston connectors loosen with age >due to vibration of the wires, combined with heating caused by poor crimps of >the fuse clips internally and the looseness of the faston themselves. If any >of them slide on and off easily it's likely the problem. _______________________________________________ Amc-list mailing list Amc-list@xxxxxxxxxxxx http://www.amc-list.com/mailman/listinfo/amc-list