[BaadAssGremlins] Re: Model Skills And Materials Needed For My 1:1 Orang
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BaadAssGremlins] Re: Model Skills And Materials Needed For My 1:1 Orange Hornet
- From: "blue77gremlin" <blue77gremlin@xxxxxxxxx>
- Date: Tue, 27 Sep 2005 00:56:56 -0000
-DOC,
You use a dehydrator too? The one you have, does it have a temp
control and a fan? This is a cool tool for model car builders and
others. My friend will paint a model, stick it in there and start
assembly after he pulls it out, all in the same day.
GOOD LUCK DOC
SCOTT
-- In BaadAssGremlins@xxxxxxxxxxxxxxx, AMC74HORNET@xxxx wrote:
> Well it's time to be innovative again. On the automatic indicator
on the
> steering column the aluminum pointer with a day glow orange line to
> indicate which gear the auto tranny is in is in poor shape. Trying
to
> figure out how to repair this and make it look stock I had to dig
deep
> into my modeling skills and supplies to come up with a solution.
The
> solution is to use the bare metal foil used to make chrome trim on
> models to make the pointer and use a small paint brush and some
day glow
> orange paint to pain the fine line on the foil and spray some model
> clear cote over it all. All the seeming little things I do make the
> difference between an ordinary nice interior job and a real
outstanding
> professional looking job. Only a true car guy would might ever
notice
> these small details. I also need to see if in the help section at
the
> auto parts store I can get a new hand brake release replacement "T"
> handle. I think I saw them for Jeep's and they looked the same. If
not I
> will paint the original one with black enamel and bake the paint
for 2-3
> days in my dehydrator. I will use a water based white model paint
to
> paint the sunken brake release letters and wipe the excess paint
off
> leaving the white lettering showing and then clear cote the
handle. I
> also added a tac to the clock spot in the dash which has a day glow
> orange pointer like the Auto Meter gauges in the stock factory pod
so I
> will paint the factory speedo, fuel and water temp gauge needles
day
> glow orange to match. I know I am a pain for details but I can't
help
> it.
> "Doc"
------------------------ Yahoo! Groups Sponsor --------------------~-->
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/YtqqlB/TM
--------------------------------------------------------------------~->
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/
<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the AMC Gremlin