[BaadAssGremlins] Re: 73 Gremlin X Project
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[BaadAssGremlins] Re: 73 Gremlin X Project
- From: "jgray_55" <jgray_55@xxxxxxxxx>
- Date: Wed, 17 Oct 2007 08:45:47 -0000
I agree on the 3.50 gears. Great compromise for driving AND weekend
dragracing. You might consider a Edelbrock Performer RPM AIR-GAP
intake and Hooker Headers if you want to have some more intense fun.
along with a in the vicinity of 500 lift hydraulic cam. Actually
Engle Cams in California will custom grind a AMC cam for no more than
an off the shelf Comp Cam will cost you!! Will make it to fit your
EXACT needs.Just my 2 cents,Joe --- In
BaadAssGremlins@xxxxxxxxxxxxxxx, baadass73gremlin@... wrote:
>
>
> In a message dated 10/15/2007 2:47:13 P.M. Eastern Daylight Time,
> kiel.lampe@... writes:
>
> Hello all, I'm a new member here. I've got a 73 Gremlin X with a
mostly
> solid body....using panels from parts cars. I'm going to leave the
> outside ugly for now and build up a solid drivetrain. Here's what
I've
> got: a used 360 to rebuild, 904 transmission already built with
shift
> kit. I'd like some economy suggestions on what to do to the 360
> (carbs, intake, headers, cam, anything you have tried and been
happy
> with.) Also, I'm thinking a Ford 9" rear end to handle everything.
Does
> that sound good? Any ideas here would be great. I'm going to build
it
> this winter.
>
> Thanks.
>
>
> If your planning on just cruising it to car shows and not racing
it,then a
> Edelbrock performer intake and a 600 cfm carb.I take it you want a
lil bit of a
> lopey idle to get attention so a good hydraulic cam from
Reed,Comp,Crane or
> Crower with an adv. duration 280 and 480 lift would be great.As for
gears ,a
> set of 3.50 gears would be perfect for the occasional trip down
the drag
> strip and still be mild enough for the street as well.do get a
high torque
> starter because the factory ford types are just garbage especially
if you plan on
> using headers.And for the trans a 2500 stall convertor would be
perfct.
> Bart
> 74 Gremlin 360/904
>
>
>
> ************************************** See what's new at
http://www.aol.com
>
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/BaadAssGremlins/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/BaadAssGremlins/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:BaadAssGremlins-digest@xxxxxxxxxxxxxxx
mailto:BaadAssGremlins-fullfeatured@xxxxxxxxxxxxxxx
<*> To unsubscribe from this group, send an email to:
BaadAssGremlins-unsubscribe@xxxxxxxxxxxxxxx
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/
Back to the Home of the AMC Gremlin