Re: [AMC-list] A/C

[adh@xxxxxxxxxxxxxxxxx (Sandwich Maker)]

" From: "Armand Eshleman" <aje1@xxxxxxxxxxxxxxx>
" 
" Thanks Jeff,
" 
" I have determined that AMC used two different versions of castings for the 
" exterior of the head.
" The engines I have from 1970 have one less bolthole boss on them that would 
" bolt the A/C compressor bracket to the head
" versus a 1976 401 head which has one more bolthole boss.
" 
" At this point I'm thinking I need to find the compressor bracket I have that 
" fits the 70 heads.
" 
" The two brackets I have in my site are
" 
" 1.     mounts a sanden compressor direct, it's from a late 80s Waggie)
" 
" 2.    mounts a york compressor.
" 
" both the above brackets have more bolt holes on them that does the 70 head.
" 
" Any body able to add some enlightenment??  please ??

just shooting from the hip --

i'd try starting with the sanden bracket and seeing what else i could
attach it to, to make up for the missing bolt.  in the unlikely event
your heads have a flat spot in the right place, they could be drilled
and tapped for the bolt...  that of course would mean taking them off
the engine.
________________________________________________________________________
Andrew Hay                                  the genius nature
internet rambler                            is to see what all have seen
adh@xxxxxxxxxxxxxxxxx                       and think what none thought
_______________________________________________
AMC-list mailing list
AMC-list@xxxxxxxxxxxxxxxxx
http://list.amc-list.com/listinfo.cgi/amc-list-amc-list.com