[AMC-List] heater knob

[russ hathaway <russh97309@xxxxxxxxx>]

Bob; what I did on my 65, and it works like butter, is
to take off the control from the engine, or firewall
depending on what type you have, and soak it real good
with WD-40. Work the valve back and forth to loosen
everything up. Then lube it with a good Teflon lube. I
bet the PO, or maybe you, lubed it with WD-40 only.
WD-40 will dry it out then rust and scale will set in.
While the control is off and the cable loose hook up a
funnel on the open end of the cable. Pour a graphite
cable lube down the cable and work the cable back and
forth.
Hook everything back up and you should be good to
go.....Russ 

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
_______________________________________________
AMC-List mailing list
AMC-List@xxxxxxxxxxxx
http://www.amc-list.com/mailman/listinfo/amc-list

or go to http://www.amc-list.com